成年人在线观看视频免费,国产第2页,人人狠狠综合久久亚洲婷婷,精品伊人久久

我要投稿 投訴建議

船舶與海洋工程英語閱讀:船舶設計師

時間:2022-10-31 20:12:54 外貿英語 我要投稿
  • 相關推薦

船舶與海洋工程英語閱讀:船舶設計師

  The Naval Architect 船舶設計師

船舶與海洋工程英語閱讀:船舶設計師

  A naval architect asked to design a ship may receive his instructions in a form ranging from such simple requirements as “an oil tanker to carry 100 000 tons deadweight at 15 knots” to a fully detailed specification of precisely planned requirements. He is usually required to prepare a design for a vessel that must carry a certain weight of cargo (or number of passengers ) at a specified speed with particular reference to trade requirement; high-density cargoes, such as machinery, require little hold capacity, while the reverse is true for low-density cargoes, such as grain.

  Deadweight is defined as weight of cargo plus fuel and consumable stores, and lightweight as the weight of the hull, including machinery and equipment. The designer must choose dimensions such that the displacement of the vessel is equal to the sum of the dead weight and the lightweight tonnages. The fineness of the hull must be appropriate to the speed. The draft------which is governed by freeboard rules------enables the depth to be determined to a first approximation.

  After selecting tentative values of length, breadth, depth, draft, and displacement, the designer must achieve a weight balance. He must also select a moment balance because centres of gravity in both longitudinal and vertical directions must provide satisfactory trim and stability. Additionally, he must estimate the shaft horsepower required for the specified speed; this determines the weight of machinery. The strength of the hull must be adequate for the service intended, detailed scantlings (frame dimensions and plate thicknesses ) can be obtained from the rules of the classification society. These scantings determine the requisite weight of hull steel.

  The vessel should possess satisfactory steering characteristics, freedom from troublesome vibration, and should comply with the many varied requirements of international regulations. Possessing an attractive appearance, the ship should have the minimum net register tonnage, the factor on which harbour and other dues are based. (The gross tonnage represents the volume of all closed-in spaces above the inner bottom. The net tonnage is the gross tonnage minus certain deductible spaces that do not produce revenue. Net tonnage can therefore be regarded as a measure of the earning capacity of the ship, hence its use as a basis for harbour and docking charges. ) Passenger vessels must satisfy a standard of bulkhead subdivision that will ensure adequate stability under specified conditions if the hull is pierced accidentally or through collision.

  Compromise plays a considerable part in producing a satisfactory design. A naval architect must be a master of approximations. If the required design closely resembles that of a ship already built for which full information is available, the designer can calculate the effects of differences between this ship and the projected ship. If, however, this information is not available, he must first produce coefficients based upon experience and, after refining them, check the results by calculation.

  Training

  There are four major requirements for a good naval architect. The first is a clear understanding of the fundamental principles of applied science, particularly those aspects of science that have direct application to ships------mathematics, physics, mechanics, fluid mechanics, materials, structural strength, stability, resistance, and propulsion. The second is a detailed knowledge of past and present practice in shipbuilding. The third is personal experience of accepted methods in the design, construction, and operation of ships; and the fourth, and perhaps most important, is an aptitude for tackling new technical problems and of devising practical solutions.

  The professional training of naval architects differs widely in the various maritime countries. Unimany universities and polytechnic schools; such academic training must be supplemented by practical experience in a shipyard.

  Trends in design

  The introduction of calculating machines and computers has facilitated the complex calculations required in naval architecture and has also introduced new concepts in design. There are many combinations of length, breadth, and draft that will give a required displacement. Electronic computers make it possible to prepare series of designs for a vessel to operate in a particular service and to assess the economic returns to the shipowner for each separate design. Such a procedure is best carried out as a joint exercise by owner and builder. As ships increase in size and cost, such combined technical and economic studies can be expected to become more common.

  (From “Encyclopedia Britannica”, Vol. 16, 1980)

  Technical terms 術語

  naval architect 造船工程(設計)師

  naval architecture造船(工程)學

  instruction 任務書、指導書

  oil tanker 油輪

  deadweight 載重量

  knot 節

  specification 規格書,設計任務書

  vessel 船舶

  cargo 貨物

  passenger 旅客

  trade 貿易

  machinery 機械、機器

  hold capacity 艙容

  consumable store 消耗物品

  light weight 輕載重量、空船重量

  hull 船體

  dimension 尺度、量綱、維(數)

  displacement 排水量、位移、置換

  tonnage 噸位

  fineness 纖瘦度

  draft 吃水

  breadth 船寬

  freeboard 干舷

  rule 規范

  tentative 試用(暫行)的

  longitudinal direction 縱向

  vertical direction 垂向

  trim 縱傾

  stability 穩性

  shaft horse power 軸馬力

  strength 強度

  service 航區、服務

  scantling 結構(件)尺寸

  frame 肋骨

  classification society 船級社

  steering 操舵、駕駛

  vibration 振動

  net register tonnage 凈登記噸位

  harbour 港口

  dues 稅收

  gross tonnage 總噸位

  deductible space 扣除空間

  revenue 收入

  docking 進塢

  charge 費用、電荷

  bulkhead 艙壁

  subdivision分艙(隔)、細分

  collision 碰撞

  compromise 折衷、調和

  coefficient 系數

  training 培訓

  fluid mechanics 流體力學

  structural strength 結構強度

  resistance 阻力

  propulsion 推進

  shipbuilding 造船

  aptitude (特殊)才能,適應性

  maritime 航運,海運

  polytechnical school 工藝(科技)學校

  academic 學術的

  shipyard 造船廠

  electronic computer 電子計算機

  owner 船主,物主

  encyclop(a)edia 百科全書

  Additional Terms and Expressions 增補術語表達

  the Chinese Society of Naval Architecture and Marine Engineering (CSNAME) 中國造船工程學會

  the Chinese Society of Navigation中國航海學會

  “Shipbuilding of China” 中國造船

  Ship Engineering 船舶工程

  China State Shipbuilding Corporation (CSSC) 中國船舶工業總公司

  China offshore Platform Engineering Corporation (COPECO) 中國海洋石油平臺工程公司

  Royal Institution of Naval Architects (RINA) 英國皇家造船工程師學會

  Society of Naval Architects and Marine Engineers (SNAME) 美國造船師與輪機工程師協會

  Principle of naval architecture 造船原理

  ship statics (or statics of naval architecture) 造船靜力學

  ship dynamics 船舶動力學

  ship resistance and propulsion 船舶阻力和推進

  ship rolling and pitching 船舶搖擺

  ship manoeuvrability 船舶操縱性

  ship construction 船舶結構

  ship structural mechanics 船舶結構力學

  ship strength and structural design 船舶強度和結構設計

  ship design 船舶設計

  shipbuilding technology 造船工藝

  marine (or ocean) engineering 海洋工程

  Notes to the Text 課文注釋

  1.

  range from A to B 的意思為“從A到B的范圍內”,翻譯時,根據這個基本意思可以按漢語習慣譯成中文。例:

  Lathe sizes range from very little lathes with the length of the bed in several inches to very large ones turning a work many feet in length.

  車床有大有小,小的車床其車身只有幾英寸,大的車床能車削數英尺長的工件。

  2.

  Such that 可以認為是such a kind/value 等的縮寫,意思為“這樣的類別/值等……以至于……”。譯成中文是,可根據具體情況加以意譯。例:

  The depth of the chain locker is such that the cable is easily stowed.

  錨鏈艙的深度應該使錨鏈容易存儲。

  3.

  Possessing an attractive appearance, the ship should have the minimum net register tonnage,the factor on which harbour and oyher dues are based.

  Possessing an attractive appearance現在分詞短語,用作表示條件的狀語,意譯成“船舶除有一個漂亮的外形……”。一般說,如分詞短語謂語句首,通常表示時間、條件、原因等。

  The factor on which…are based中的the factor是前面the minimum net register tonnage的銅謂語,而on which…are based是定語從句,修飾the factor。

  4.

  Electroniccomputers make it possible to prepare series id designs for a vessel to operate in a particular service and to assess the economic returns to the shipowner for each separate design.

  句中的it是形式賓語,實際賓語為不定式短語 to prepare series of designs …和to assess the economic returns …

http://www.dgxbdz.com/

【船舶與海洋工程英語閱讀:船舶設計師】相關文章:

船舶與海洋工程個人簡歷07-26

船舶實習報告范文12-16

船舶工作總結03-19

船舶專業實習日記07-27

船舶規章制度10-31

船舶工作總結范文04-19

船舶實習報告(精選12篇)10-20

頂崗實習周記船舶07-16

船舶租賃合同11-25

船舶轉讓合同03-15